home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Windows Expert
/
Windows Expert.iso
/
drivers
/
eizow30.zip
/
README
< prev
next >
Wrap
Text File
|
1990-06-20
|
3KB
|
83 lines
Microsoft Windows 3.0 EIZO VGA Driver Installation
==================================================
6/19/90
=======
This disk contains the following files necessary to install the EIZO VGA
Microsoft Windows 3.0 driver using Windows 3.0 SETUP utility.
EIZOVGA --> File used as a check by the Windows SETUP
program for disk validity.
README --> This documentation file
OEMSETUP.INF --> The file which the Windows SETUP program
uses to install the Windows 3.0 drivers
for EIZO VGA
EWINB07.DRV --> The Windows 3.0 driver for EIZO MD-B07
( 800 x 600 pixels, 16 colors )
EWIN600.DRV --> The Windows 3.0 driver for EIZO MD-B10
( 800 x 600 pixels, 16 colors )
EWIN768.DRV --> The Windows 3.0 driver for EIZO MD-B10
( 1024 x 768 pixels, 16 colors )
EWINVSD.DRV --> The Windows 3.0 driver for EIZO MD-B10
( 1024 x 1018 Virtual Screen, 16 colors )
VDDEVGA.386 --> The Windows 3.0 386 Enhanced Mode driver
for EIZO MD-B10
To install the Windows 3.0 driver for EIZO VGA you must do the following:
1 - If you have already installed Windows 3.0 for another device...
a) Make sure you are not running Windows.
b) Execute the SETUP program which Windows installs into your Windows
installation directory (default is C:\WINDOWS).
c) When prompted by SETUP for a display device page, down to the OTHER
selection and choose OTHER.
d) When prompted, insert your Windows 3.0 Driver for EIZO VGA floppy
into drive A and press ENTER.
e) You will see that you may install a EIZO VGA driver.
Choose one of the drivers appropriate for your display system
and press ENTER.
f) You may be prompted to insert floppy disks from the Windows 3.0
disks -- make sure that these disks are available.
g) When SETUP is finished you can run Windows 3.0 using the following
command.
WIN /R <ENTER> --> Windows run on REAL MODE
WIN /S <ENTER> --> Windows run on STANDARD (286 PROTECT) MODE
WIN /3 <ENTER> --> Windows run on 386 ENHANCED MODE
2 - If you have not yet installed Windows 3.0 on your machine...
a) Follow the instructions provided by Microsoft for installing
Windows 3.0 on your system.
b) When prompted by SETUP for a display device page, down to the OTHER
selection and choose OTHER.
c) When prompted, insert your Windows 3.0 Driver for EIZO VGA floppy
into drive A and press ENTER.
d) You will see that you may install the EIZO VGA drivers.
Choose one of the drivers appropriate for your display system
and press ENTER.
e) Continue with the remainder of the Windows 3.0 installation
procedure.
f) When SETUP is finished you can run Windows 3.0 using the following
command.
WIN /R <ENTER> --> Windows run on REAL MODE
WIN /S <ENTER> --> Windows run on STANDERD (286 PROTECT) MODE
WIN /3 <ENTER> --> Windows run on 386 ENHANCED MODE
------------------------------------------------------------------------------
*** Additional Information ***
When using MS-Windows 80386 protect mode with the Eizo VGA Windows 3.0 driver,
you must edit the standard MS-Windows SYSTEM.INI configuration file and
add the following lines to the file:
[386Enh]
emmexclude=C000-CFFF